CONTAINERS FOR STORAGE OF EXPLOSIVE MATERIALS – 500 (KSEM – 500)

KONTEJNER_1
KONTEJNER_2

KSEM-500 container is designed for storing of 500 kg ofexplosive.

Characteristics of the container:
-height……………………………………………….1 800 mm
-width………………………………………………..1 300 mm
-length……………………………………………….1 800 mm
-mass of empty container…………………….1 480 kg

The container consists of two chambers. The basic one is made of minimum 7 mm thick steel plate, while the 300 mm high, 500 mm wide, 500mm long initial devices chamber is made of minimum 10 mm thick steel plate, so that no detonation of any accidentally or intentionally provoked explosion would be transmitted to the explosive storing chamber.
The inside of the container is covered with 57 mm thick wooden coat that doesn’t absorb humidity. The container possesses a “sled”and holes for cables that serve to drag the container from one place to another. An anchor can be attached to the bottom of the container in order to keep any smaller vehicle from dragging it.
The container has two grounding cross connections that leave no need for building of any high lightning rod installation.The grounding must be done in accordance with the current SRPS regulations and amount to less than 10 Ω.
On the container’s door, there is rubber that ensures its tightness.
The container’s door locks with three padlocks. The door on the initial devices chamber locks with two padlocks. A self-extinguish paint represents container’s final protection. Appropriate warning signs, that are in accordance with the UN symbols for class 1 of danger materials, are put on the container.